- Movincool Office Pro 60 Service Manual
- Movincool Office Pro 36
- Movincool Office Pro 12
- Movincool Office Pro 36 Manual
- Movincool
- Movincool Office Pro 60 Manual
- Portable Specialty Coolers Office Pro 60. Providing up to 60,000 Btu/hr of cooling capacity, more than twice the cooling power of the Office Pro 24, the Office Pro 60 portable air conditioner is specifically designed for large office spaces and computer rooms filled with heat-generating electronics.
- Computer Cooling Office & Server Room Air Conditioner Units. Providing up to 60,000 Btu/hr of computer cooling capacity (more than twice the cooling power of the Office Pro 24), the Office Pro 60 portable air conditioner is specifically designed for cooling large office spaces and computer rooms that house heat-generating electronics.
Www.movincool.com operation manual office pro 60 read this manual carefully for instructions on correct installation and usage, and read all safeguards. Postage will be paid by adressee first-class mail permit no. 8390 long beach, ca business reply mail denso sales california, inc. 3900 via oro avenue long beach, ca no postage.
Jul 28, 2009 When server rooms are set up in existing office space, as most are, they are usually provided the same amount of cooling as the 'people space.' The problem is that servers produce much more heat than people in an office. Enter the Movincool Office Pro 60 Portable Air Conditioner. Www.movincool.com operation manual office pro 60 read this manual carefully for instructions on correct installation and usage, and read all safeguards. Postage will be paid by adressee first-class mail permit no. 8390 long beach, ca business reply mail denso sales california, inc. 3900 via oro avenue long beach, ca no postage.
Repair Section
36
Indication of service
code
Press ON/OFF and
U buttons
simultaneously for 3 sec. Indication
contents is as follows.
1) See page 36 and 37.
2) Press ON /OFF button.
Change model setting
For installing new controller PCB, if
a different model name appears
when the unit is reset or turned on,
change model name according to
the correct procedure.
1) While pressing
U and V
buttons, plug the power cord.
<Condition>
LCD indicates current setting
model name and buzzer sounds.
2) After setting the model type by
pressing
U and V button,
unplug the unit.
Activation of high
pressure switch
When high pressure switch
(connected to J104) activates
(=J104 input turns to open) 3 times
in 24 h, “HP” is indicated and signal
output (J106) turns on.
Movincool Office Pro 60 Service Manual
When it activates 10 times in 24 h,
“FAIL HP” is indicated and buzzer
sounds.
Find the cause of high pressure to
address it.
Check the following.
Ambient air temperature
(65 °F (18.3 °C),
50
%
RH
⇔
95 °F (35 °C), 60 %RH)
Air filter (if dirty, wash up.)
Condenser fan motor (if not
working, replace.) Defect of high
pressure switch (if switch is open
when unit is off, replace switch.)
Reset the system.
To RESET: Press ON/OFF and
HI/LO buttons on the control box
simultaneously for 5 sec.
LCD Display
Description
Condition
Reset/Remedy
LCD
DF
FZ
Movincool Office Pro 36
OD
Description
Value
Defrost status
Evap. out pipe
temperature
26
⇔
109F
(“26”
⇔
“X9”)
Outdoor
temperature
0 (“00”)
TU
AM
F
SET TEMP
Movincool Office Pro 12
HI
Movincool Office Pro 36 Manual
ON
COOL
Movincool
FAN